Logo Ernst und Sohn

Preview

Author(s):     
 
Liedert, S.; Kraus, S.
 
Title:     
 

 
Abstract:     
 
Die Dachkonstruktion des als Experimentalbau errichteten Heidebroek-Baus ist ein Faltwerk, das aus zusammengespannten Stahlbetonfertigteilsegmenten besteht. Aufgrund von Unzulänglichkeiten in der konstruktiven Durchbildung und jahrelanger, durch eine desolate Abdichtung verursachte Durchfeuchtung des Faltwerks musste von einer bereits eingetretenen Korrosion der Spannglieder ausgegangen werden, so dass die Standsicherheit des Dachs in Frage stand. Zunächst durch temporäre Gerüsttürme als Hilfsunterstützung gesichert, wurde die Dachkonstruktion schließlich ertüchtigt und instandgesetzt. Dabei erfolgten die Baumaßnahmen bei laufendem Betrieb in der von der TU Dresden genutzten Versuchshalle. Zur Sicherstellung der ausreichenden Tragfähigkeit im Fall des Versagens einzelner Spannglieder sowie zur Verhinderung eines plötzlichen Gesamtversagens des Faltwerks durch progressiven Kollaps wurden Stahllamellen auf der Dachinnenfläche aufgeklebt und an den Stirnseiten der Falten endverankert. Die Bemessung der Lamellen einschließlich ihrer Verankerung und der Nachweis der vorhandenen Dachkonstruktion erfolgten unter Berücksichtigung der gemäß den gültigen Normen anzusetzenden Einwirkungen. Dieser Beitrag geht auf die Konzeption der Tragwerksertüchtigung sowie auf die diesbezüglichen, nach vier hauptsächlichen Grenzzuständen differenzierten Standsicherheitsnachweise ein und fasst die wesentlichen Aspekte der Ausschreibung, Vergabe und Ausführung der Sanierungsarbeiten sowie der Überwachung der Ertüchtigungs- und Instandsetzungsmaßnahmen zusammen.

Heidebroek-Bau at the Dresden University of Technology - Improvement and repair of the prestressed folded-plate roof.
The roof construction of the Heidebroek-Bau, erected as an experimental building, is a folded-plate construction comprising tied precast segments of reinforced concrete. Given the inadequacies in the design and the dampness which had penetrated the structure over a period of many years as a result of the desolate condition of the seals, it was to be assumed that the prestressing members already displayed corrosion and that the structural safety of the roof was thus to be questioned. Initially secured by way of temporary staging towers as auxiliary support, the roof construction was subsequently strengthened and repaired. The building work was accomplished without interrupting the use of the research hall by the Dresden University of Technology. To ensure a sufficient load-bearing strength should individual prestressing members fail, and to eliminate the risk of a sudden total failure with progressive collapse of the folded-plate construction, steel lamellae were attached to the inner surface of the roof and anchored at the ends of the folds. The dimensioning of the lamellae, including their anchoring and verification of the existing roof construction, took into account all potential influences specified by the applicable technical standards. This paper discusses the concept for improvement of the supporting structure and the corresponding differentiated verification of stability on the basis of four essential critical states, and provides an overview of key aspects of the tender process, execution of the improvement work and monitoring of the implemented strengthening and repair measures.
 
Source:     Bautechnik 86 (2009), No. 11
 
Page/s:     667-676
 
Language of Publication:     German



I would like to buy the article

You can download this article for 25 € as a PDF file (0.49 MB).
The PDF file can be read, printed and saved.
Duplication and forwarding to third parties is not allowed.


Please enter your email address now to start the order process.
The link for the download will be sent to the email address stated after the
order process has been completed.

Your email address


I am an online subscriber

As an online subscriber of the journal "Bautechnik" you can access this article via Wiley Online Library.

I would like to order "Bautechnik"

This article has been published in the journal "Bautechnik". If you would like to learn more about the journal, you can order a free sample copy or find out more information on our website.


Prices include VAT and postage. Prices for 2017/2018.
€ Prices apply to Germany only. Subject to alterations, errors excepted.