Title: | |
Abstract: | Comments a) Comment to Table 1 in Stahlbau 2013/8Formulae in Table 1 may be used for Âfollowing purposes:1. Determination of the position for the critical cross-section m2. Calculation of init,m(x), init,m,m and MIIhinit,m(x)3. Elastic verification of the buckling Âresistance 4. Plastic verification of the buckling Âresistanceaa) For the elastic verification of the buckling resistance:Use all the formulae with elastic cross-section characteristics for purposes 1, 2, 3.ab) For the plastic verification of the buckling resistance:For purposes 1and 2 use all the Âformulae with elastic cross-section characteristicsFor purpose 4 use the formula (15) with MRd(x) = Mpl,Rd(x)b) Comment to Table 4 and Table 6Due to the error in 5.1.1.2 b) and c) shown in the table above the values of NIIhint and of MIIhint in the table 4 are 1,133-times greater than the correct ones. But the difference in utilisation for frame columns shown in the column [5.2.2(3) b + 5.3.2(11)] in the table 6 is due to small contribution of imperfections effect negligible and conclusions in 6 are not INFluenced by this.Wir bitten um Entschuldigung und ÂBeachtung. Die Redaktion |
Source: | Stahlbau 83 (2014), No. 1 |
Page/s: | 64 |
Language of Publication: | German |
Download article free of charge
The following article is available at no additional cost (PDF - 0.05 MB) The PDF file can be read, printed and saved. Duplication and forwarding to third parties is not allowed. |
I would like to order "Stahlbau"This article has been published in the journal "Stahlbau". If you would like to learn more about the journal, you can order a free sample copy or find out more information on our website. |