Preview

Author(s):	Prachar, Martin; Jandera, Michal; Wald, Franti ek; Zhaob, Bin
Title:	Fire resistance of slender section beams - Subjected to lateral torsional buckling
Abstract:	The paper shows experimental and numerical research into slender cross-section beams in case of fire. The topic is very important because little investigation has been made and little experimental data has been collected so far. In the framework of the RFCS project FIDESC4 - Fire Design of Steel Members with Welded or Hot-rolled Class 4 Cross-sections, several simple supported beams were tested at elevated temperature at the Czech Technical University in Prague. Currently, Eurocode 3 contains a number of simple rules for design of slender Class 4 cross-sections which, based on recent numerical simulations, proved themselves to be over-conservative. Through refining these rules, material savings could be achieved, which would lead to greater competitiveness of the steel structures. This is being covered in existing research, but is not published in this paper, which is limited to lateral torsional buckling behaviour only. Determination of the bending resistance for members subjected to lateral torsional buckling of Class 1-3 cross-sections at elevated temperature is based on the same principles as the design at room temperature, according to EC 3 part 1-1 [1]. However, it differs in using only one imperfection factor for all types of cross-sections. The informative Annex E of the standard (EC 3 part 1-2 [2]) recommends using the design formulas for slender (Class 4) sections as well. But there is a restriction of the critical temperature value and a different reduction of yield strength is used (0.2 % proof strength for Class 4 instead of 2.0 % proof strength for stockier Class 1-3 sections). For the non-uniform members (variable section height), a limited design procedure is given in EC 3 part 1-1 [1]. This is applicable for room temperature only. The possibility of using these rules for fire design is not yet confirmed.
Source:	Steel Construction 7 (2014), No. 3
Page/s:	188-192
Language of Publication:	English

I would like to buy the article

You can download this article for 25 € as a PDF file (0.79 MB).
The PDF file can be read, printed and saved.
Duplication and forwarding to third parties is not allowed.

Please enter your email address now to start the order process.
The link for the download will be sent to the email address stated after the
order process has been completed.

Your email address

I am an online subscriber

As an online subscriber of the journal "Steel Construction" you can access this article via Wiley Online Library.

I would like to order "Steel Construction"

This article has been published in the journal "Steel Construction". If you would like to learn more about the journal, you can order a free sample copy or find out more information on our website.

Prices include VAT and postage. Prices for 2017/2018.
€ Prices apply to Germany only. Subject to alterations, errors excepted.