Preview

Author(s):
Title:	Bond behaviour of straight, hooked, U-shaped and headed bars in cracked concrete
Abstract:	Most classic investigations on bonding properties in reinforced concrete have been performed on the basis of pull-out tests, where a reinforcement bar is pulled out from an uncracked concrete cylinder, prism or cube. In these tests, the bond is governed by the concrete strength and bar surface properties of the reinforcement (bond index, rib geometry) or by the splitting strength of the concrete (concrete cover). In the latter case, bond failure occurs due to uncontrolled cracking of the concrete specimen. In contrast to these fundamental tests, bond in many structural members is activated within already cracked concrete. This is particularly relevant for the reinforcement in beams and slabs (both for flexural and transverse reinforcement), as the reinforcing bars might be located at planes where flexural cracks develop. The opening of these cracks along the reinforcement is nevertheless not uncontrolled (as opposed to splitting failures), but it is governed by the bending deformations. The bond properties and strength of the reinforcement in actual members are therefore influenced by the opening of these cracks and are potentially different from those observed in classic pull-out tests. The present paper aims to address this topic by presenting the results of an experimental investigation with 89 monotonic pull-out tests performed on cracked ties. The opening of the cracks was controlled while transverse bars - located in the plane of these cracks - were pulled out from the specimens. The tests were performed for crack openings ranging from 0.2 mm to 2.0 mm in order to cover conditions both at the serviceability and ultimate limit states. The results show a very significant influence of in-plane cracking on both strength and bond-slip stiffness, with decreasing mechanical performance for increasing crack openings. The performance of different actual anchorage types (straight, hooked, U-shaped and headed bars) - generally characterized through force-slip relationships - is finally analytically investigated and compared to the test results.
Source:	Structural Concrete 17 (2016), No. 5
Page/s:	799-810
Language of Publication:	English

I would like to buy the article

You can download this article for 25 € as a PDF file (1.76 MB).
The PDF file can be read, printed and saved.
Duplication and forwarding to third parties is not allowed.

Please enter your email address now to start the order process.
The link for the download will be sent to the email address stated after the
order process has been completed.

Your email address

I am an online subscriber

As an online subscriber of the journal "Structural Concrete" you can access this article via Wiley Online Library.

I would like to order "Structural Concrete"

This article has been published in the journal "Structural Concrete". If you would like to learn more about the journal, you can order a free sample copy or find out more information on our website.

Prices include VAT and postage. Prices for 2017/2018.
€ Prices apply to Germany only. Subject to alterations, errors excepted.