Preview

Author(s):	Wardenier, Jaap; de Vries, Peter; Timmerman, Gerrit
Title:	Evaluation of cracks in an offshore crane runway girder
Abstract:	This paper deals with the evaluation of fatigue cracks in a box type radial crane runway girder with full penetration welds between the web and flange. After 20 years of service fatigue cracks were observed which were initiated in the flange at the toe of the full penetration weld with the web. The observed cracks in the crane runway girder vary in length from a few mm to 330 mm with a summation of the lengths of all observed cracks being 750 mm, on a total length of 56000 mm, thus being only 1.3 %. The investigation consists of the fatigue analysis described in this paper and additional experimental investigations with scale tests of approximately 1:2 on equivalent I sections with a concentrated load and with a line load to investigate whether cracks stop when they have grown through the residual tensile stress field. For this analyzed crane runway girder with multi-layered full penetration welds and with small cracks at the weld toes in the flange, based on EN 1993-6 the damage would be 1.0 for a design class 98 which is not far from the “class” 92 found by Kuhlmann et al, [1] for tests with rolling wheels, however, related to weld failures from the root of not fully penetrated fillet welds in combination with crack initiations at the weld toe.
Source:	Steel Construction 10 (2017), No. 1
Page/s:	67-71
Language of Publication:	English

I would like to buy the article

You can download this article for 25 € as a PDF file (0.34 MB).
The PDF file can be read, printed and saved.
Duplication and forwarding to third parties is not allowed.

Please enter your email address now to start the order process.
The link for the download will be sent to the email address stated after the
order process has been completed.

Your email address

I am an online subscriber

As an online subscriber of the journal "Steel Construction" you can access this article via Wiley Online Library.

I would like to order "Steel Construction"

This article has been published in the journal "Steel Construction". If you would like to learn more about the journal, you can order a free sample copy or find out more information on our website.

Prices include VAT and postage. Prices for 2017/2018.
€ Prices apply to Germany only. Subject to alterations, errors excepted.