Preview

Author(s):	Grimsmo, Erik L.; Aalberg, Arne; Langseth, Magnus; Clausen, Arild H.
Title:	How placement of nut determines failure mode of bolt-and-nut assemblies
Abstract:	Bolt-and-nut assemblies under tension loading can either fail by bolt fracture or thread failure. The latter failure mode is arguably undesirable because it leads to failure at a comparatively low deformation level. Moreover, incipient thread failure is challenging to detect in the case of over-tightening since the bolt remains in the bolt hole after this type of failure occurs. The failure mode of bolt-and-nut assemblies is determined by several well-known factors such as the thread engagement length and the relative strength of bolt and nut. However, one factor that has received limited attention in the literature is the placement of the nut along the threaded portion of the bolt. We have performed a series of direct tension tests on various single M16 bolt-and-nut assemblies where the placement of the nut was varied. Some of the assemblies experienced that placing the nut close to the thread run-out, i.e. near the unthreaded portion of the bolt (the shank), led to thread failure, whereas placing the nut sufficiently far from the thread run-out led to bolt fracture. We carried out finite element simulations of the tests in order to investigate further the mechanisms occurring during failure. In the case where the nut was located close to the thread run-out, the simulations revealed that necking of the bolt affected the effective overlap of the internal and external threads. This effect seemed to contribute to thread failure in both tests and simulations.
Source:	Steel Construction 10 (2017), No. 3
Page/s:	241-247
Language of Publication:	English

I would like to buy the article

You can download this article for 25 € as a PDF file (1.62 MB).
The PDF file can be read, printed and saved.
Duplication and forwarding to third parties is not allowed.

Please enter your email address now to start the order process.
The link for the download will be sent to the email address stated after the
order process has been completed.

Your email address

I am an online subscriber

As an online subscriber of the journal "Steel Construction" you can access this article via Wiley Online Library.

I would like to order "Steel Construction"

This article has been published in the journal "Steel Construction". If you would like to learn more about the journal, you can order a free sample copy or find out more information on our website.

Prices include VAT and postage. Prices for 2017/2018.
€ Prices apply to Germany only. Subject to alterations, errors excepted.