Author(s): | Schulz, Rolf-Rainer; Kahmer, Herbert |
Title: | |
Abstract: | Die neue DAfStb-Richtlinie für Wasserundurchlässige Bauwerke aus Beton (WU-Richtlinie) fordert für Betonfertigteile mit Ortbetonergänzung eine vollflächige kornraue Oberfläche und den Nachweis einer mittleren Rautiefe von nunmehr 1,5 mm statt bisher 0,9 mm. Dies gilt demnach auch für den Bereich der Gitterträger, was sowohl herstellungstechnisch als auch messtechnisch eine besondere Herausforderung darstellt. Bei Elementwänden muss im Rahmen der Erstprüfung sogar an den Innenoberflächen beider Fertigteilschalen geprüft werden. In der laufenden Produktion und auf der Baustelle genügen normalerweise eine Sichtprüfung und der Vergleich mit einer Referenzplatte. In Zweifelsfällen ist jedoch mit dem Sandflächenverfahren oder mit lasergebundenen Verfahren zu prüfen. Die Richtlinie lässt allerdings offen, wie dies in der Praxis umzusetzen ist. Deshalb ist es das Ziel dieses Beitrags, Lösungsmöglichkeiten aufzuzeigen. Consequences from the directives of the German WU-Guideline for precast twin walls - Manufacturing and proving roughness on the inner surfaces of the precast shells The new German guideline for waterproof constructions requires that precast twin walls with cast in place concrete completion must have an entirely rough surface with gravelled texture and also an average roughness depth of 1.5 mm in contrast to the former target of 0.9 mm. These requirements apply to the space within the steel lattice girders, too, which is quite a challenge for casting and proving. Initial tests have to be performed even on the inner surfaces of both shells. During current production and also on site visual examination and comparison with a reference slab will be sufficient. But in case of doubt sand patch tests or laser measurements have to be performed. Unfortunately the guideline does not answer the question how this could be realized in practice. Therefore the intention of this paper is to present solutions for this purpose. |
Source: | Beton- und Stahlbetonbau 115 (2020), No. 3 |
Page/s: | 188-197 |
Language of Publication: | German |
I would like to buy the article
You can download this article for 25 € as a PDF file (2.26 MB). The PDF file can be read, printed and saved. Duplication and forwarding to third parties is not allowed. |
I am an online subscriberAs an online subscriber of the journal "Beton- und Stahlbetonbau" you can access this article via Wiley Online Library. |
I would like to order "Beton- und Stahlbetonbau"This article has been published in the journal "Beton- und Stahlbetonbau". If you would like to learn more about the journal, you can order a free sample copy or find out more information on our website. |