Author(s): | |
Title: | Material characteristics and compactability of phyllitic tunnel excavation material / Verdichtungseigenschaften von schiefrig-phyllitischem Tunnelausbruchmaterial - Examination of non-recyclable spoil at the Brenner Base tunnel / Betrachtung von nicht verwertbarem Ausbruch beim Brenner Basistunnel |
Abstract: | Large quantities of excavated rocks are generated during tunnel driving. Recycling possibilities and total percentage of recycling are depending on the rock conditions (rock type and rock properties), as well as the applied driving method. If recycling of the excavated rock mass is not possible or reasonable from a technical or economical point of view, the excavated material needs to be deposited in landfills. Thereby, the consumed landfill volume depends on the material volume of non-recyclable rock and its compactability as a function of the loosening of the rock by excavation and landfill installation. Both, material volume and compactability of the excavated material, are difficult to evaluate in advance. Apart from unpredictable lithological changes and variation of the driving parameters (e.g. depth of advance in conventional driving, contact pressure of tunnel boring machine), external influences - like afflux of water or weather conditions during installation of the material - significantly affect the compactability of the excavated aggregates. In this study, the actual example of phyllitic rock material excavated by conventional drilling and blasting from the main tunnel tubes of the Brenner Base Tunnel has been chosen to take a closer look at the research question concerning the compactability of phyllitic rock material. Since excavation material is increasingly used in construction industry, detailed knowledge on this matter is necessary for a successful application. Wird im Zuge der Errichtung von Infrastrukturbauwerken in den Untergrund eingegriffen, fällt zwangsläufig Abraummaterial vom anstehenden Felsen bzw. Lockergestein an. Aus ökologischen und ökonomischen Beweggründen wird derartiges Material vermehrt direkt an Ort und Stelle verwertet und bei der Herstellung der zu errichtenden Bauwerke beispielsweise als Schüttmaterial eingesetzt. Damit kommt Gesteinsmaterial zum Einsatz, bei dem es sich a priori nicht um eine Standard-Gesteinskörnung bzw. ein Standard-Korngemisch handelt, wie diese beispielsweise in Steinbrüchen oder Schottergruben gezielt abgebaut werden. Diese Thematik, betreffend die Gesteinseigenschaften, v. a. in Hinblick auf Verdichtbarkeit und Tragfähigkeit, wird am Beispiel einer schiefrig-phyllitischen Gesteinskörnung, welche beim Vortrieb des Brenner Basistunnels in der Innsbrucker Quarzphyllit-Zone anfällt, beleuchtet. Neben lithologischen Abweichungen und Veränderungen der Vortriebsparameter gibt es äußere Einflüsse, die sich wesentlich auf die Verdichtbarkeit der Korngemische und damit auf die erreichbare Einbaudichte auswirken. In diesem Beitrag werden Anforderungen, gängige Verdichtungsmethoden und Verfahren zur Verdichtungskontrolle verglichen und in Hinblick auf die spezielle Gesteinskörnung diskutiert. Ziel ist es, detaillierte Kenntnis über die besonderen Verdichtungseigenschaften schiefrig-phyllitischer Gesteinskörnungen zu gewinnen, um einen erfolgreichen Materialeinbau gewährleisten zu können. |
Source: | Geomechanics and Tunnelling 14 (2021), No. 4 |
Page/s: | 400-415 |
Language of Publication: | English/German |
I would like to buy the article
You can download this article for 25 € as a PDF file (2.82 MB). The PDF file can be read, printed and saved. Duplication and forwarding to third parties is not allowed. |
I am an online subscriberAs an online subscriber of the journal "Geomechanics and Tunnelling" you can access this article via Wiley Online Library. |
I would like to order "Geomechanics and Tunnelling"This article has been published in the journal "Geomechanics and Tunnelling". If you would like to learn more about the journal, you can order a free sample copy or find out more information on our website. |