Journal articles
Author(s) | Title | Journal | Issue | Page | Category |
---|---|---|---|---|---|
Mahler, András; Móczár, Balázs | Strength and deformation characteristics of tertiary soils / Scherfestigkeits- und Verformungsverhalten von tertiären Böden | Geomechanics and Tunnelling | 4/2019 | 352-361 | Topics |
AbstractThis article presents the results of in-situ and triaxial testing of tertiary soils (Pannonian sand and Oligocene clay) performed for two major Hungarian projects. The shear strength of these formations varies greatly. Just interpreting the shear strength of tertiary soils poses a number of questions, which definitely exceeds the scope of existing standards. Since extracting multiple samples from the overconsolidated, high-density samples was not possible, the necessary parameters had to be determined from one larger specimen. Through short examples, it is demonstrated how the test results can be described using soil models and transferred into geotechnical design, highlighting the limits of numerical modelling (in case of these soils). x | |||||
Spagnoli, Giovanni; Feinendegen, Martin; Ziegler, Martin | Assessing the clogging potential of clay/additive / mixtures by cone pull-out tests | Geomechanics and Tunnelling | 4/2019 | 362-371 | Topics |
AbstractClogging can be a massive problem during the mechanized excavation of tunnels. Soil conditioning with foams and/or polymers is normally used in these cases to decrease the adverse effect of clogging. In a research project the cone pull-out test was used to assess the variation of adherence for four sticky clays with four commercial additives. Results show that the additives have also an impact on the basic mechanical properties of the clays such as liquid limit, plasticity index and shrinkage limit. The tests were performed on the one hand by spraying the additives on the metal surface of the cone and on the other hand by directly mixing them to the clays to reach the critical consistency index (i.e. where the maximum adherence with water was observed). Sprayed cone tests show for two clays a decrease in adherence. However, by directly mixing the additives to the clay, adherence considerably decreases, except for one kaolinitic clay. The results can be useful to select suitable additives or to develop new ones considering the geotechnical and mineralogical properties of the excavated clays. x | |||||
de Oliveira, Daniela Garroux G.; Thewes, Markus; Diederichs, Mark S. | EPB machine excavation of mixed soils - Laboratory characterisation | Geomechanics and Tunnelling | 4/2019 | 373-385 | Topics |
AbstractEarth pressure balance (EPB) tunnel boring machines are shield machines that rely on their own excavated material as a support medium to maintain the support pressure at the face. This material also needs to have the necessary properties to be extracted, transported and, finally, disposed of. Whenever the natural material does not fulfil the necessary requirements, additives like water, foam, polymers, and fines, must be added, modifying the excavated ground to the desired conditions. The rheological properties of any excavated material, together with any additives, must be investigated and understood, as they will influence the flow behaviour of this conditioned material, directly affecting the machine operation and tunnel logistics. While studies assessing the flowability related to the EPB excavation of sand or clay soils are available, there is a lack of information on mixed soils. This paper presents the results from a testing campaign with mixed clay-sand samples, aiming to reproduce a simplified tropical weathered mixed soil, investigating its flow behaviour when changing certain controlled variables: clay-sand proportions, clay mineral, size of the clastic grain mixed with clay, water content, and additives (foam and polymers). Results from the tests conducted with a flow table, a slump test, and a rheometer device were compared, providing insights about the flow behaviour of the tested samples and its interaction with an EPB machine. x | |||||
Site Reports: Geomechanics and Tunnelling 4/2019 | Geomechanics and Tunnelling | 4/2019 | 386-387 | Site Reports | |
AbstractDSI Underground supplies a broad range of products for one of the world's largest rockfill dam / DSI Underground liefert breite Produktpalette für einen der höchsten Steinschüttdämme der Welt x | |||||
Technical Reports: Geomechanics and Tunnelling 4/2019 | Geomechanics and Tunnelling | 4/2019 | 387-388 | Technical Reports | |
AbstractThe Filstal Bridge at the high-speed railway line Wendlingen-Ulm - Challenges for the geotechnical planning / Hochgeschwindigkeitsstrecke Wendlingen-Ulm - Herausforderungen bei der geotechnischen Fachplanung x | |||||
Diary of Events: Geomechanics and Tunnelling 4/2019 | Geomechanics and Tunnelling | 4/2019 | 389-390 | Diary of Events | |
Titelbild: geotechnik 4/2019 | geotechnik | 4/2019 | Titelbild | ||
AbstractDie Verdichtungskontrolle ist wesentlich für die Gewährleistung der Standsicherheit und dauerhaften Gebrauchstauglichkeit von Erdbauwerken. Die Praxis zeigt jedoch, dass die Verdichtungskontrolle mittels Plattendruckversuchen bei Sekundärbaustoffen nicht immer so einfach möglich ist, wie es im erdbautechnischen Regelwerk vorgeschlagen wird. Daher wurden Felduntersuchungen zur Ermittlung der im Feld erreichten Trockendichte sowie statische und dynamische Plattendruckversuche durchgeführt. Die Ergebnisse dieser Feldversuche werden im Beitrag “Compaction control of secondary materials used in earthworks” vorgestellt und diskutiert (Beitrag ab S. 199, Foto: Stefan Huber). x | |||||
Inhalt: geotechnik 4/2019 | geotechnik | 4/2019 | Inhalt | ||
Boley, Conrad | Felsmechanik - eine Traditionsdisziplin mit großer Zukunft | geotechnik | 4/2019 | 185 | Editorials |
Sondermann, Wolfgang | Komplexität und Zeitdruck - Faktoren, die unsere Arbeit beeinflussen | geotechnik | 4/2019 | 186 | Vom Vorsitzenden |
Hettler, Achim; Hegert, Harriet | Numerische Simulation des Erdwiderstands für Sand und Vergleich mit Messergebnissen aus Modellversuchen | geotechnik | 4/2019 | 187-198 | Fachthemen |
AbstractIm vorliegenden Beitrag wird ein von Hegert [1] auf den Modellversuchskasten von Bartl [2] abgestimmtes Finite-Elemente-Modell (FE-Modell) vorgestellt und durch Vergleich der Beiwerte für den mobilisierten Erdwiderstand, der Grenz- und Oberflächenverschiebungen, der lokalen Erddruckbeiwerte und der Angriffshöhe der Erddruckresultierenden ausführlich überprüft. Die Messergebnisse können unter Berücksichtigung der Möglichkeiten und Grenzen des Stoffmodells gut simuliert werden. Mit dem validierten FE-Modell wird gezeigt, dass die üblichen Ansätze der DIN 4085 [3], z. B. für Erddruckbeiwerte und -resultierende, und die bekannten Mobilisierungsfunktionen von Bartl, Besler und Vogt in weiten Bereichen sehr gute Näherungen darstellen. Es konnte bestätigt werden, dass die Erdwiderstandsbeiwerte von Pregl [4] und Sokolowski [5] gut geeignet sind für eine Parallelbewegung der Wand und die in DIN 4085 vorgeschlagene Abminderung bei Drehung um den Kopf- oder Fußpunkt wirklichkeitsnahe Ergebnisse liefert. x | |||||
Huber, Stefan; Henzinger, Christoph; Heyer, Dirk | Compaction control of secondary materials used in earthworks | geotechnik | 4/2019 | 199-211 | Fachthemen |
AbstractCompaction control is a fundamental part of quality assurance for earthworks and essential to ensuring the long-term stability and serviceability of earth structures. As the testing of relative compaction for coarse-grained materials is time-consuming, plate load tests are typically used for this purpose. Practical experience shows that the compaction control of secondary materials using plate load tests is not as straightforward as suggested in earthwork specifications. Unfortunately, these subtleties are not widely known and typically lead to rejection of the compacted layers, despite the material having been compacted thoroughly. This paper summarizes the findings of compaction field tests on several secondary materials that were field-compacted to varying dry densities. Field testing of the compacted layers included the determination of dry density and plate load tests (static and dynamic). The results of these field tests are presented and discussed here and show that the parameters provided by plate load tests do not relate to the dry densities of the materials tested in the same way as they do for natural materials. Suggestions are provided concerning the most viable way of conducting compaction control of secondary materials within the earthwork specifications of Germany and Austria. x | |||||
Barka, Elissavet; Birle, Emanuel; Demond, Derik | Geotechnische Untersuchungen an modifizierten Stahlwerksschlacken | geotechnik | 4/2019 | 212-218 | Fachthemen |
AbstractAnhand von umfangreichen experimentellen Laboruntersuchungen wurde gezeigt, dass Stahlwerksschlacken (SWS) durch die Zugabe von feinkörnigen Zusatzstoffen in ihrer Wasserdurchlässigkeit derart reduziert werden können, dass sie gemäß dem Merkblatt über Bauweisen für Technische Sicherungsmaßnahmen beim Einsatz von Böden und Baustoffen mit umweltrelevanten Inhaltsstoffen im Erdbau (M TS E-Merkblatt) ohne zusätzliche Abdichtungsschichten eingesetzt werden können. Die Untersuchungen erfolgten an drei SWS, die unter Verwendung von vier feinkörnigen Zusatzstoffen granulometrisch modifiziert wurden. Die Versuchsergebnisse zeigen, dass Wasserdurchlässigkeitsbeiwerte von kf < 1 · 10-8 m/s bereits bei einer Zugabemenge von 8 M.-% feinkörnigen Zusatzstoffen erreicht werden können. Im Vergleich zu natürlichen Baustoffgemischen zeigte sich auch, dass für SWS zum Erreichen eines geringen Luftporenanteils mit einhergehender zusätzlicher Reduktion ihrer Wasserdurchlässigkeit i. d. R. eine höhere Verdichtungsenergie (modifizierte Proctorenergie) erforderlich ist und dass das Quellvermögen von natriumaktivierten Bentoniten aufgrund der Ionenkonzentration in der Porenlösung herabgesetzt werden kann. x | |||||
Barbir, Olja; Pistrol, Johannes; Adam, Dietmar; Kopf, Fritz; Auer, Florian; Antony, Bernhard | Gleisstopfen: Modellierung der Stopfpickel-Schotterbett-Interaktion | geotechnik | 4/2019 | 219-228 | Fachthemen |
AbstractDer Zustand des Gleisschotterbetts ist einer der wichtigsten Faktoren für den sicheren und ökonomischen Betrieb von Gleisanlagen. Um den idealen Zeitpunkt für die Schotterreinigung oder die Erneuerung des Schotters zu finden bzw. auch um die Gebrauchstauglichkeit und Leistung über den gesamten Lebenszyklus zu erhöhen, ist die Kenntnis über den Schotterzustand bzw. über die Abnutzung des Schotters von größter Wichtigkeit. Das Gleisstopfen als zentraler Prozess der Gleisinstandhaltungsarbeiten beeinflusst die Instandhaltungsintervalle maßgeblich und ist notwendig für die Wiederherstellung der korrekten Gleislage. Während des Stopfvorgangs bilden die Stopfpickel ein dynamisches Interaktionssystem mit dem Gleisschotter. Die translatorische Beistellbewegung wird durch die dynamische Anregung der Pickel überlagert, um den Gleisschotter unterhalb der Schwellen bestmöglich zu verdichten. Die genannte Interaktion wurde an verschiedenen Standorten in Österreich messtechnisch erfasst und dient als Grundlage für einen Vergleich mit den Ergebnissen eines neu entwickelten, semi-analytischen mechanischen Modells. Schlussfolgerungen bzgl. des unterschiedlichen Verhaltens und Widerstands gegen weitere Verdichtung von abgenutztem und neuem Schotter werden getroffen und im vorliegenden Beitrag diskutiert. x | |||||
DGGT-Mitteilungen: geotechnik 4/2019 | geotechnik | 4/2019 | 229-233 | DGGT-Mitteilungen | |
Abstract36. Baugrundtagung 2020 in Wiesbaden - “70 Jahre DGGT” x | |||||
Persönliches: geotechnik 4/2019 | geotechnik | 4/2019 | 233-235 | Persönliches | |
AbstractDr. Bernd Schuppener zum 75. Geburtstag x | |||||
CBTR-Nachrichten: geotechnik 4/2019 | geotechnik | 4/2019 | 235-237 | CBTR-Nachrichten | |
AbstractEhrenmitgliedschaft für Univ.-Prof. Dr.-Ing., Dr.-Ing. E. h. Rudolf Floss x | |||||
Das aktuelle Urteil: geotechnik 4/2019 | geotechnik | 4/2019 | 237-239 | CBTR-Nachrichten | |
AbstractSchlechter Preis bleibt schlechter Preis? Der BGH schwenkt um! x | |||||
Short course "Grouting Fundamentals & Current Practice" zum ersten Mal in Europa | geotechnik | 4/2019 | 239-240 | Tagungsberichte | |
Firmen und Verbände: geotechnik 4/2019 | geotechnik | 4/2019 | 240 | Firmen und Verbände | |
Zuschrift: geotechnik 4/2019 | geotechnik | 4/2019 | 240-242 | Zuschriften | |
AbstractDiskussionsbeitrag zu “Arbeitsintegrierte Verdichtungskontrolle während der Rütteldruckverdichtung” von Dipl.-Ing. Dr.techn. Péter Nagy, BSc. und Univ.Prof. Dipl.-Ing. Dr.techn. Dietmar Adam (geotechnik 3/19, Band 42, S. 124-133.) x | |||||
Reviewer: geotechnik 4/2019 | geotechnik | 4/2019 | 242 | Reviewer | |
Termine: geotechnik 4/2019 | geotechnik | 4/2019 | 242-244 | Termine | |
AbstractSTUVA-Tagung 2019 x | |||||
Inhalt: Mauerwerk 4/2019 | Mauerwerk | 4/2019 | Inhalt | ||
Titelbild: Mauerwerk 4/2019 | Mauerwerk | 4/2019 | Titelbild | ||
AbstractPolygonal brick facade decorates building complex in the Swiss Riehen. Despite the meanwhile more than 21, 000 inhabitants, Riehen could preserve its former village character. A residential complex with three apartment buildings developed in the passage from the houses in the village centre lying close to each other to the loosely built living quarters at the village border. The new buildings with three full storeys and each with a circumferentially recessed attic floor host overall 29 condominiums with flexible floor plans. All apartments are designed age appropriately and barrier free. The polygonal building structures break the block-edge and stand in a park-like designed environment like clods. (Photo: Simone Schwab-Giger) x |