Artikeldatenbank
Autor(en) | Titel | Zeitschrift | Ausgabe | Seite | Rubrik |
---|---|---|---|---|---|
Ausstellung über Ove Arup in London | Stahlbau | 3/2016 | 237-238 | Aktuell | |
Firmen und Verbände: Stahlbau 3/2016 | Stahlbau | 3/2016 | 238-239 | Firmen und Verbände | |
KurzfassungSpecial Feuerverzinkte Fassadenunterkonstruktionen x | |||||
Termine: Stahlbau 3/2016 | Stahlbau | 3/2016 | 239-240 | Termine | |
Content: Steel Construction 3/2016 | Steel Construction | 3/2016 | Contents | ||
Petzek, Edward; Schmitt, Victor; Metes, Elena; Ispasoiu, George; Turcan, Alexandru | Romanian projects and integral bridge solutions based on composite dowels | Steel Construction | 3/2016 | 161-169 | Articles |
KurzfassungThe design and construction of sustainable and durable bridges with low maintenance costs is one of the tasks of road and railway administrations of the European Countries. The structures must be safe, economical and need less maintenance during their service life. All these needs can be found in integral abutment bridges. This solution, which eliminates the bearings and expansion joints, leads to low construction and maintenance costs. Integral bridges also have good earthquake resistance. Bridges are vital structures in the transport infrastructure; it is a fact that, in the last decades, composite bridges have become a popular solution in many European countries as a cost-effective and aesthetic alternative to concrete bridges. Their competitiveness depends on several aspects, such as site conditions, local costs of materials and personnel and the contractor's experience. The main topics of this paper are: design of integral bridges, innovative composite dowels for shear transmission, construction of bridges in Romania, structural analysis of bridges and monitoring. x | |||||
Lange, Jörg | Pozorski, Z.: Sandwich panels in civil engineering - Theory, testing and design. | Steel Construction | 3/2016 | 169 | Book reviews |
Pak, Daniel; Kopp, Maik; Feldmann, Markus; Seidl, Günter | Condition monitoring of VFT-Rail® slab-track railway bridges | Steel Construction | 3/2016 | 170-178 | Articles |
KurzfassungIn 2010 the VFT-Rail® system was approved in accordance with CEN and railway standards by Germany's Federal Railway Authority (EBA) for operational testing. The approval was accompanied by a monitoring campaign on a VFT-Rail® bridge crossing the River Simmerbach. As a result of the positive experience gained during the operation of this bridge, two additional railway bridges were designed by SSF Ingenieure AG and put into service in 2014 by Deutsche Bahn (DB). To survey those bridges, a monitoring programme has been developed and instigated. The monitoring programme includes investigating the stress distribution between the concrete and specially designed composite dowels, which have a better fatigue resistance compared with conventional headed studs. The forces at several rail support points are also a focus of interest. The German railway operator DB Netz AG requested the survey to prove the applicability of state-of-the-art calculation methods, which were not part of compulsory codes. x | |||||
Evaluation of the performance of steel fibre reinforced self-compacting concrete in elevated slab systems; from the material to the structure | Steel Construction | 3/2016 | 178 | Completed Phd theses | |
Ungermann, Dieter; Holtkamp, Svenja; Rademacher, Dennis | Hot-dip galvanized composite dowel strips | Steel Construction | 3/2016 | 179-183 | Articles |
KurzfassungThis paper presents additional potential for the future economic development of composite dowel strips by using the durable and long-lasting corrosion protection of hot-dip galvanization. Based on the completed FOSTA research project P835 [5] on the use of hot-dip galvanizing for steel and composite bridge construction, the range of applications for hot-dip galvanizing will be transferred to composite dowel strips in composite bridges. Following a brief summary of the most important results of the previous project, where the corrosion protection duration and the influence of hot-dip galvanizing on the fatigue behaviour of steel were examined, the objectives and planned studies of the new research project will be presented. The currently ongoing FOSTA research project P1042 [8] was initiated by RWTH Aachen University and TU Dortmund University. The results should allow the safe use of hot-dip galvanized composite dowel strips in conjunction with cyclic loads. x | |||||
Fire resistance of cold-formed steel columns | Steel Construction | 3/2016 | 183 | Completed Phd theses | |
Steurer, Marlene; Petraschek, Thomas; Fink, Josef | Development of an innovative sandwich plate for trough-type railway bridges - Extremely slender deck slab structure in steel-concrete composite design with cellular longitudinal shear connectors | Steel Construction | 3/2016 | 184-190 | Articles |
KurzfassungSubstitute structures for old railway bridges with open railway tracks, which are constructed in accordance with valid European standards and regulations, require a specific, suitable deck slab design. Therefore, a composite plate with cellular longitudinal shear connectors and a low overall depth of 200 mm has been investigated at the Research Centre of Steel Structures (TU Wien). The research programme comprised experimental studies as well as additional numerical analyses by means of the finite element method concerning the shear force transmission-mechanism of the sandwich design. Laboratory studies included, among other issues, information about the failure mechanism in the core concrete. This article provides a description of the test program and gives a brief summary of selected research results. A short overview on continuing research activities to determine the serviceability, the load-bearing capacity as well as the fatigue strength of the sandwich plate is presented. x | |||||
Fire resistance of cold-formed steel columns | Steel Construction | 3/2016 | 190 | Completed Phd theses | |
Simon, Pavel; Hrdlicka, Libor; Dráb, Ales; Zverina, Vojtech | A composite dowel bridge in the Czech Republic - Development, optimization and implementation of a railway bridge | Steel Construction | 3/2016 | 191-199 | Articles |
KurzfassungThe floods in the Czech Republic in the last few decades have resulted in a significant number of bridges having to be rebuilt. Unfortunately, the work meant long-term traffic closures for railway bridges, coupled with significant costs for renovation and for providing alternative transport services. As a result, the minimum clear headroom above the design flood level required for new bridges and for reconstructing existing bridges has been increased. This initiated a search for new approaches to designing individual parts of bridge crossings, aiming to comply with the stricter conditions. The research aims to decrease costs in comparison with the costs of raising the finished grade level of the railway, especially at places where adjacent sections such as railway stations etc. are connected. x | |||||
Berthellemy, Jacques; Schavits, David; Erre, Charlotte | Crossing motorways under traffic without intermediate piers | Steel Construction | 3/2016 | 200-206 | Articles |
KurzfassungThe European research programme SBRI attempted to reveal the costs caused during the service life of a bridge - direct costs for the bridge owner as well as indirect costs for users. The principal results of SBRI should make it possible to take better account of the true costs of a central pier by considering the risks in the construction phase and those that may threaten the highway overpass during its service life. x | |||||
HISTWIN_PLUS | Steel Construction | 3/2016 | 206 | News | |
Dias, Vincent; Odenbreit, Christoph | Investigation of hybrid steel-glass beams with adhesive silicone shear connection | Steel Construction | 3/2016 | 207-221 | Articles |
KurzfassungGlass is used in current construction applications mostly as a façade element, its structural role being only rarely exploited, despite its significant resistance to in-plane compression. A steel-glass composite beam was built to investigate a hybrid steel-glass assembly and its loadbearing behaviour. To fulfil this objective, the existing types of steel-glass connection were evaluated, which allowed the possibilities offered by adhesive jointing to be highlighted. The selection of the adhesive, detailed in the present article, constituted a crucial aspect. An excessively soft connection does not transfer the shear loads between the glass and steel adherends, whereas an excessively stiff connection leads to failure of the glass. A two-component structural silicone was chosen and its properties were assessed with the help of an intensive test programme. As a result of this programme, a new quasi-incompressible hyperelastic material law was developed in order to represent the silicone elastomer behaviour. Numerical simulations were conducted in parallel to large-scale four-point bending tests on the adhesively bonded steel-glass composite beams. The aims were, on the one hand, to assess the bending stiffness of the steel-glass composite beam and, on the other, to validate the numerical simulations to conduct parametric studies. x | |||||
Steau, Edward; Keerthan, Poologanathan; Mahendran, Mahen | Web crippling capacities of rivet fastened rectangular hollow flange channel beams under one flange load cases | Steel Construction | 3/2016 | 222-239 | Articles |
KurzfassungA new rivet fastened rectangular hollow flange channel beam (RHFCB) was proposed using an intermittently rivet fastening process as an alternative to welded beams. The rivet fastened RHFCB allows greater section optimisation and flexibility in designing suitable combinations of web and flange widths and thicknesses for many industrial applications. In the industrial applications of rivet fastened RHFCBs as flooring, roofing or modular building systems, their flanges will be fastened to supports, which will provide increased capacities. However no research has been conducted to investigate the web crippling capacities of RHFCBs with flanges unfastened and fastened to supports under one-flange load cases. Similarly the applicability of current design rules for cold-formed steel sections are not suitable for rivet fastened RHFCBs. Hence to address these issues, an experimental study was conducted to investigate the web crippling behaviour and capacities of RHFCBs based on the new AISI S909 standard test method. This study included rivet fastened RHFCBs with flanges unfastened and fastened to supports under End One Flange (EOF) and Interior One Flange (IOF) load cases. Tests with flanges fastened to supports showed that web crippling capacities increased by 39 and 5 % for EOF and IOF load cases. Comparisons of experimental web crippling capacity results with predictions using the current AS/NZS 4600 and AISI S100 design standards showed that web crippling design equations are conservative for rivet fastened RHFCBs with flanges unfastened and fastened to supports under EOF and IOF load cases. Hence new equations are proposed to determine the web crippling capacities of rivet fastened RHFCBs. This paper presents the details of this web crippling experimental study of rivet fastened RHFCB sections and the results. x | |||||
Mirambell, Enrique; Bordallo, Jordi; Real, Esther | Torsion and its interaction with other internal forces in EN 1993-1-1 - a new approach | Steel Construction | 3/2016 | 240-248 | Articles |
KurzfassungThis paper presents and clarifies the treatments included in EN 1993-1-1 [1] relating to checking the resistance of steel cross-sections under torsion and its interaction with other internal forces. Specifically, the origin of the formulations for shear-torsion interaction, which has not been found in the literature, is presented. Furthermore, a very simple formulation based on the expressions used for shear-torsion interaction is developed in order to take into account bending-warping torsion interaction for symmetrical I-sections (IP and HE steel profiles). Such a formulation overcomes the overly conservative approach given in EN 1993-1-1 [1] for class 1 and class 2 cross-sections (plastic and compact cross-sections). Finally, a rigorous method for determining the bending resistance of cross-sections is proposed considering the interaction with shear and torsion. The proposal is well suited to the concept of cross-section class and is perfectly consistent with the approaches set out to consider bending-shear and bending-warping torsion interactions. x | |||||
Helbig, Thorsten; Riederer, Jochen; Kamp, Florian; Oppe, Matthias | Free-form on every scale - "Tornado" roof structure for Bory Mall, Bratislava, Slovakia | Steel Construction | 3/2016 | 249-354 | Reports |
KurzfassungThe Bory Mall Shopping Centre, designed by the Italian architect Massimiliano Fuksas, is a mixed use development located on the outskirts of Bratislava, Slovakia. x | |||||
World Steel in Figures 2016 is available | Steel Construction | 3/2016 | 254 | News | |
Schueremans, Luc; Furtado, Ana Claudia | FRISOMAT - steel innovator in cold-rolled buildings | Steel Construction | 3/2016 | 255-258 | Reports |
Euro Space Center at Libin-Transinne | Steel Construction | 3/2016 | 258 | News | |
ECCS news: Steel Construction 3/2016 | Steel Construction | 3/2016 | 259-263 | ECCS news | |
Kurzfassung
x | |||||
Announcements: Steel Construction 3/2016 | Steel Construction | 3/2016 | 264 | Announcements | |
Contents: Structural Concrete 3/2016 | Structural Concrete | 3/2016 | Contents | ||