Artikeldatenbank
Autor(en) | Titel | Zeitschrift | Ausgabe | Seite | Rubrik |
---|---|---|---|---|---|
Kurrer, Karl-Eugen | Bernhard Hauke im Redaktionsbeirat von STAHLBAU | Stahlbau | 1/2018 | 71-72 | Persönliches |
Aktuell: Stahlbau 1/2018 | Stahlbau | 1/2018 | 72-75 | Aktuell | |
KurzfassungErfolgreicher Auftakt “Mechanische Verbindungsmittel im Stahlbau” x | |||||
bauforumnews: Stahlbau 1/2018 | Stahlbau | 1/2018 | 75-78 | bauforumnews | |
KurzfassungNeue Kooperation zwischen bauforumstahl und Ernst & Sohn x | |||||
Termine: Stahlbau 1/2018 | Stahlbau | 1/2018 | 78 | Termine | |
Kurzfassung40. Stahlbauseminar 2018 x | |||||
Cover Picture: Steel Construction 1/2018 | Steel Construction | 1/2018 | Cover Pictures | ||
KurzfassungMore than 2 million people pass through the Värtahamnen, Silja Line's ferry passenger terminal in Stockholm each year. As Ruukki designed and delivered the steel structures for the terminal, the prominent building is a good reference for the company and has recently been awarded a commendation from the Swedish Institute of Steel Construction. Every other year, the Institute gives an award for a structure where steel has been used innovatively and in an architecturally interesting way in the load-bearing structure of a building, which has been completed in an environmentally sustainable way. (© Ruukki) x | |||||
Content: Steel Construction 1/2018 | Steel Construction | 1/2018 | Contents | ||
Preview: Steel Construction 2/2018 | Steel Construction | 1/2018 | Preview | ||
KurzfassungStefanie Weidner and Walter Haase: The Implementation of an Adaptive High-rise Building x | |||||
Dubina, Dan; Ungureanu, Viorel | Editorial: Steel Construction 1/2018 | Steel Construction | 1/2018 | 1-2 | Editorials |
Steel Construction: Annual table of contents Volume 10 (2017) | Steel Construction | 1/2018 | 1-8 | Annual table of contents | |
Iwata , Mamoru; Midorikawa, Mitsumasa; Koyano, Kazuhisa | Buckling-restrained brace with high structural performance | Steel Construction | 1/2018 | 3-9 | Articles |
KurzfassungThe authors have studied the buckling-restrained brace providing a stable hysteretic characteristic even under high-strain conditions. The structural performance of the buckling-restrained brace is represented by the evaluation formula that is the lower limit of the cumulative plastic strain energy ratio. However, as earthquakes are becoming much longer, so it is necessary to research and develop a new buckling-restrained brace with a higher energy dissipation capacity. In this paper, our past studies are reviewed and the conditions of high-performance of buckling-restrained braces extracted. The buckling-restrained brace considered was tested. As a result, a buckling-restrained brace with a larger cumulative plastic strain energy ratio is proposed. x | |||||
Jansseune, Arne; Belis, Jan; De Corte, Wouter | Buckling design of axially compressed steel silos on discrete supports - Comparison between FE-calculated buckling strengths and Eurocode interaction curves | Steel Construction | 1/2018 | 10-15 | Articles |
KurzfassungThis paper compares the buckling strengths derived from a validated shell-based FEM model of discretely supported axially compressed silos with the interaction curves given in EN 1993-1-6 for axial compression. The buckling strengths were numerically determined for a wide range of geometries and yield strengths, considering two configuration types of discretely supported steel silos: with engaged columns and partial-height U-shaped longitudinal stiffeners. For these types, remarkably good correspondence was found between the numerical results of discretely supported steel silos and the interaction curves for uniformly compressed cylindrical steel silos, although unconservative in many cases. x | |||||
Misiek, Thomas; Huck, Gerhard; Käpplein, Saskia | The "combined approach" for the design of shear diaphragms made of trapezoidal profile sheeting | Steel Construction | 1/2018 | 16-23 | Articles |
KurzfassungDedicated to Prof. Dr.-Ing. Helmut Saal on the occasion of his 75th birthday x | |||||
Ziemian, Ronald D.; Batista Abreu, Jean C. | Design by advanced analysis - 3D benchmark problems - Members subjected to major- and minor-axis flexure | Steel Construction | 1/2018 | 24-29 | Articles |
KurzfassungSteel design codes continue to be expanded to permit the use of more advanced methods of non-linear analysis. Designers looking to employ such methods need to validate their analysis software and, just as importantly, verify their ability to utilize it properly. The literature contains many benchmark problems and results to help achieve this, but nearly all are limited to two-dimensional behaviour. This paper is intended to contribute a new set of benchmark problems in order to help satisfy the need for a database of examples in which accurate modelling of three-dimensional or spatial behaviour is essential. x | |||||
Lindner, Joachim; Kuhlmann, Ulrike; Jörg, Fabian | Initial bow imperfections e0 for the verification of Flexural Buckling According to Eurocode 3 Part 1-1 - additional considerations | Steel Construction | 1/2018 | 30-41 | Articles |
KurzfassungAccording to Eurocode 3 Part 1-1, the resistance of compression members may be calculated in two different ways: through the design buckling resistance based on the reduction factor &khgr; or through the cross section resistance based on internal forces according to a second order analysis, also taking into account equivalent initial bow imperfections e0. The second way is especially advantageous in the case of axial forces and bending. Values for equivalent initial bow imperfections e0 are given in codes like Eurocode 3 [4] or DIN 18800 [3]. The presently used values from Table 5.1 of Eurocode 3 will have to be changed in future, as was demonstrated recently by intensive investigations, especially for cases of axial compression and bending moments My or Mz respectively. Additional investigations concerning high-strength steel S700, welded sections and circular hollow sections are presented. The proposed changes included in the newest draft of prEN1993-1-1 are explained through the evaluation of several ultimate load calculations. It is also shown that for the case that the initial bow imperfection e0 is calculated dependent on the non-dimensional slenderness , restrictions regarding interaction and the ratio of Mpl/Mel are also necessary. x | |||||
Schillo, Nicole; Feldmann, Markus | Experiments on the rotational capacity of beams made of high-strength steel | Steel Construction | 1/2018 | 42-48 | Articles |
KurzfassungThe rotational capacity of beams made of high-strength steel grades S700 and S960 was investigated within the scope of the RUOSTE research project, which was partly funded by the RFCS. Beams made of high-strength steel are supposed to have a lower rotational capacity, and are thus excluded from plastic/plastic design according to [1], [2]. Although the strain hardening of high-strength steel material is generally lower than that of mild steels, for some structures with discrete plastic hinges, the rotational capacity might be still sufficient to reach the respective cross-section classification. In the research presented here, eight tests on beams in bending were carried out to assess the limit of cross-section class 1 for high-strength steel. x | |||||
Snijder, H.H.; van der Aa, R.P.; Hofmeyer, H.; van Hove, B.W.E.M. | Lateral torsional buckling design imperfections for use in non-linear FEA | Steel Construction | 1/2018 | 49-46 | Articles |
KurzfassungTo perform geometrically and materially non-linear analyses including imperfections for steel beam lateral torsional buckling, the size and shape of the geometric imperfection can be taken from EN 1993-1-1. The shape is prescribed as an initial bow along the weak axis of the section, excluding torsion of the cross-section. Alternatively the shape of the imperfection can be taken equal to the lateral torsional buckling mode, including torsion. Several tables and formulae exist for the determination of the size of the imperfection. In this article, different imperfection approaches are presented for finite element simulations to evaluate lateral torsional non-linear buckling resistances and to compare these to results obtained with design rules. Based on the comparisons made, the article concludes with a proposal for design imperfections to be used in non-linear Finite Element Analyses (FEA) for lateral torsional buckling of beams. x | |||||
Marginean, Ioan; Dinu, Florea; Dubina, Dan | Simulation of the dynamic response of steel moment frames following sudden column loss. Experimental calibration of the numerical model and application | Steel Construction | 1/2018 | 57-64 | Articles |
KurzfassungSignificant research effort has been devoted in recent years to the evaluation of the capacity of steel frame structures to resist progressive collapse after sudden column loss. Due to the complex load-structure interaction and material behaviour, it can be very difficult to evaluate the ultimate capacity of structural components using current analytical methods. Therefore considerable research effort has been directed to experimental testing and sophisticated numerical simulations. Although sudden column loss is a dynamic process, most experimental studies on full-scale or scaled down specimens were performed under quasi-static loads. This paper presents the results of a study devoted to the evaluation of steel frame response following the loss of a column. Advanced numerical models are calibrated using experimental test results and dynamic increase factors are studied. Several full-scale structures are investigated for a sudden column loss scenario. x | |||||
Hansen, Thomas | Post-buckling strength of plate girders subjected to shear - experimental verification | Steel Construction | 1/2018 | 65-72 | Articles |
KurzfassungThis paper describes a calculation method for steel plate girders with transverse web stiffeners subjected to shear. It may be used to predict the failure load or, as a design method, to determine the optimal number of internal web stiffeners. The method is based on the theory of plasticity. Many other theories have been developed, but the method presented here differs from these theories by incorporating the strength of the transverse stiffeners and by assuming that the tensile bands may pass the transverse stiffeners - an effect often observed in tests. Other methods have only dealt with a single web field between two stiffeners. x | |||||
Kuhlmann, Ulrike; Just, Adrian; El Boueiz, Perla; Prüm, Cécile | Derivation of the characteristic water pressure resistance of combined steel pile walls | Steel Construction | 1/2018 | 73-83 | Articles |
KurzfassungWorld trade is steadily increasing, leading to a high demand for economic solutions for quay walls. The combined steel pile wall is the most common steel construction solution. The primary elements are king piles, while intermediate piles function as secondary elements. The design of these secondary elements is governed by section 5.5.2 of EN 1993-5 [9]. The test-based method described in section 5.5.2(5) and (6) is used to generate the characteristic water pressure resistance values of the different combinations of I-shaped king and Z-shaped intermediate piles, each in different steel grades, which are given in the product catalogue of ArcelorMittal [1]. The test series executed and the subsequent setting-up and validation of a numerical model are presented in detail in this paper. A numerical model was used for a parametric study. The different failure modes observed in this parametric study are presented. A statistical evaluation according to Annex D of EN 1990 [6] and Annex C of EN 1993-1-5 [8] leads to characteristic resistance values. x | |||||
Spiliopoulos, Andreas; Dasiou, Maria-Eleni; Thanopoulos, Pavlos; Vayas, Ioannis | Experimental tests on members made from rolled angle sections | Steel Construction | 1/2018 | 84-93 | Articles |
KurzfassungAngle sections are widely used in civil engineering applications and especially in lattice towers for telecommunication purposes. The principal and geometrical axes of angle sections do not coincide and exhibit very low rigidity when it comes to uniform and non-uniform torsion. Thus, design expressions, e.g. those included in EN1993-1-1 or EN 1993-3-1, do not apply for cross-sections or members composed of angle sections. In addition, limited experimental investigations of members made from angle sections can be found in the literature, and those are mostly for cold-formed ones. This paper presents a test campaign involving members made from equal-leg hot-rolled angle sections which was carried out at the Institute of Steel Structures of the National Technical University of Athens (NTUA). Tests included eight three-point bending tests and 31 buckling tests on columns subjected to concentric and eccentric compression. The aims of the research are to use the experimental data for the calibration of numerical models, to investigate possible inelastic reserves in angles which have been detected in analytical models and to serve as a reference for the development of new design expressions oriented towards angle sections only. x | |||||
Classen, Martin; Stark, Alexander; Hegger, Josef | Steel-HSC composite beams with partial shear connection and miniaturized limited-slip-capacity connectors | Steel Construction | 1/2018 | 94-103 | Articles |
KurzfassungThe flexural strength of steel-concrete composite members depends on both the shear capacity and the ductility of the shear connectors between steel beam and concrete slab. Plastic design strategies of composite beams (equilibrium method) allow the shear strength of the connectors to be easily considered. However, these models do not take into account the deformation behaviour of the connectors nor their limited slip capacity. Several design codes only allow ductile shear connectors with a deformation capacity &dgr;ult of at least 6 mm to be used, while composite beams with non-ductile connectors (&dgr;ult < 6 mm) are excluded from plastic design. Consequently, promising innovative shear connectors with non-ductile deformation behaviour cannot be used economically. Using the example of the miniaturized pin connector, this paper illustrates how finite element models of composite beams - considering both the shear and slip capacities of the connectors - can be used to derive the minimum degree of partial shear connection for beams with limited slip capacity. The proposed modelling strategy and the methodology for deducing the minimum degree of partial shear connection can be transferred and assigned to other types of shear connector with either a ductile or non-ductile deformation behaviour. x | |||||
NEWS: Steel Construction 1/2018 | Steel Construction | 1/2018 | 104 | News | |
KurzfassungSteel Construction has been accepted for inclusion in Scopus x | |||||
ECCS news: Steel Construction 1/2018 | Steel Construction | 1/2018 | 104-106 | ECCS news | |
Kurzfassung
x | |||||
Kurrer, Karl-Eugen | Pelke, E., Brühwiler, E. (Ed.): Engineering History and Heritage Structures - Viewpoints and Approaches. | Steel Construction | 1/2018 | 171-172 | Book review |
Titelbild: UnternehmerBrief Bauwirtschaft 1/2018 | UnternehmerBrief Bauwirtschaft | 1/2018 | Titelbild | ||
Kurzfassung
x |